top of page

Outdoor Area Lighting

CERTIFICATIONS

STANDARDS

Luminaires [UL 1598:2021 Ed.5]

Luminaire [CSA C22.2 No. 250.0:2021 Ed.5]

FCC Part 15 Subpart B; ANSI C63.4a-2017

ANSI C136.2-2018: Clause 6, Clause 7, 7.1, 7.2, 7.3, 7.4

External Mechanical Impacts Test (IK10)

RoHS [European Directive 2011/65/EC]

Saline Mist Test [ISO 9227] x 1,000 hours

Ingress Protection (IP65)

Vibration [ANSI C136.2] (Level 2)

OTHERS

DLC Premium (Family ID #JJJOYK)

International Dark-Sky Association (IDA) *

* Warm-toned LED light sources (3000K or lower)

must be selected to meet the International Dark-Sky

Association dark sky requirements.

DRIVERS

Intelligent DALI-2 / D4i LED Drivers inside

ETL Certification

SPECIFICATIONS

4000K@120-277 V

One-module Models

AL-090-3M-NW-UL-D-BZ

AL-090-4M-NW-UL-D-BZ

AL-090-5M-NW-UL-D-BZ

Two-module Models

AL-160-3M-NW-VL-D-BZ

AL-160-4M-NW-VL-D-BZ

AL-160-5M-NW-VL-D-BZ

Three-module Models

AL-245-3M-NW-UL-D-BZ

AL-245-4M-NW-UL-D-BZ

AL-245-5M-NW-UL-D-BZ

Four-module Models

AL-275-3M-NW-UL-D-BZ

AL-275-4M-NW-UL-D-BZ

AL-275-5M-NW-UL-D-BZ

3000K@120-277 V

One-module Models

AL-090-3M-WW-UL-D-BZ

AL-090-4M-WW-UL-D-BZ

AL-090-5M-WW-UL-D-BZ

Two-module Models

AL-160-3M-WW-VL-D-BZ

AL-160-4M-WW-VL-D-BZ

AL-160-5M-WW-VL-D-BZ

Three-module Models

AL-245-3M-WW-UL-D-BZ

AL-245-4M-WW-UL-D-BZ

AL-245-5M-WW-UL-D-BZ

Four-module Models

AL-275-3M-WW-UL-D-BZ

AL-275-4M-WW-UL-D-BZ

AL-275-5M-WW-UL-D-BZ

4000K@480 V

One-module Models

AL-090-3M-NW-UH-D-BZ

AL-090-4M-NW-UH-D-BZ

AL-090-5M-NW-UH-D-BZ

Two-module Models

AL-160-3M-NW-UH-D-BZ

AL-160-4M-NW-UH-D-BZ

AL-160-5M-NW-UH-D-BZ

Three-module Models

AL-245-3M-NW-UH-D-BZ

AL-245-4M-NW-UH-D-BZ

AL-245-5M-NW-UH-D-BZ

Four-module Models

AL-275-3M-NW-UH-D-BZ

AL-275-4M-NW-UH-D-BZ

AL-275-5M-NW-UH-D-BZ

3000K@480 V

One-module Models

AL-090-3M-WW-UH-D-BZ

AL-090-4M-WW-UH-D-BZ

AL-090-5M-WW-UH-D-BZ

Two-module Models

AL-160-3M-WW-UH-D-BZ

AL-160-4M-WW-UH-D-BZ

AL-160-5M-WW-UH-D-BZ

Three-module Models

AL-245-3M-WW-UH-D-BZ

AL-245-4M-WW-UH-D-BZ

AL-245-5M-WW-UH-D-BZ

Four-module Models

AL-275-3M-WW-UH-D-BZ

AL-275-4M-WW-UH-D-BZ

AL-275-5M-WW-UH-D-BZ

TM-21-21 CALCULATORS

One-module Models

AL-090-3M-WW-XX-D-BZ

AL-090-4M-WW-XX-D-BZ

AL-090-5M-WW-XX-D-BZ

Two-module Models

AL-160-3M-WW-XX-D-BZ

AL-160-4M-WW-XX-D-BZ

AL-160-5M-WW-XX-D-BZ

Three-module Models

AL-245-3M-WW-XX-D-BZ

AL-245-4M-WW-XX-D-BZ

AL-245-5M-WW-XX-D-BZ

Four-module Models

AL-275-3M-WW-XX-D-BZ

AL-275-4M-WW-XX-D-BZ

AL-275-5M-WW-XX-D-BZ

INSTALLATION GUIDE

FEATURES

Access Door

To gain access to the terminal blocks for power connection, use a 1/4" flat blade screwdriver to open the access door.

Cord Grip

The device features an integrated cord grip, rated at IP67, designed to accommodate a variety of power cables ranging from #14 AWG to #6 AWG.

Strain Relief Mechanism

The device incorporates an integrated strain relief mechanism, which is designed to safely secure a variety of power cables, from #14 AWG to #6 AWG.

This can be easily tightened using a 1/4" flat blade screwdriver.

Terminal Blocks

The device is equipped with three-position terminal blocks, which are designed to accept a variety of conductors, from #14 AWG to #6 AWG stranded copper or aluminum. These can be secured using a 1/4" flat blade screwdriver.

The configuration for the power cable connection on the three-position terminal block is L1-G-L2/N.

Toolless Rotatable Photocell Receptacle

By pressing and holding the PUSH TO UNLOCK button on the patented rotatable receptacle base, you can rotate the receptacle either clockwise or counter-clockwise to achieve the correct orientation.

The 355° stop will likely be activated if you encounter resistance while rotating. In this case, rotate the receptacle base in the opposite direction until you reach the desired orientation. Once done, release the PUSH TO UNLOCK button and check the photocell to ensure it's securely locked in place.

Tilting Mechanism

The slip-fitter, made of cast Aluminum, is engineered to attach to a pipe tenon or rigid conduit with outer diameters ranging between 1.660" (equivalent to 1.25" NPS) and 2.375" (equivalent to 2" NPS).

The luminaire's tilt is secured by tightening two hex socket head bolts. For precise adjustment, incremental marks of 20⁰ (-10⁰ to +10⁰) are provided, allowing tilting in 5⁰ increments.

bottom of page